Zero waste certificate

LME Market Data

Alum
3330.00 $
A.Alloy
2990.00 $
Copper
13373.00 $

Metal Bulletin

Weekly
2620 € / Ton

The recipe for an unstoppable recycling base.

GKR Metal is Turkey’s one of the leading secondary Aluminium manufacturer. Our plant which is located in Tekirdağ (in the European side of Turkey) has 19.800 m² closed and 40.000 m² total area.

Read more >

Products

  • Aluminium Alloy Ingots

    Aluminium ingots are produced between 4-7 kg and shipped up to 1 ton bundle for the Turkey’s largest companies that are producing die casting products for international automotive and household appliance companies.

  • Aluminium T-Ingots

    T-ingots are produced between 300-1000 kg our customers that are producing billets, sheets, coils and bars for mainly construction, food and beverage can companies.

  • Deoxidants

    Deoxidants are produced with aluminium rates of 94% - 97%. They can be produced as half ball (between 150-300 grams) or as ingot (between 4-7 kg). Our customers who are operating in Iron/Steel industry are using this product to reduce the amount of dissolved oxygen and other impurities.

  • Briquetted Flux

    Synthetic slag maker is a commercial, eco-friendly product, obtained from recovering the salt inside the aluminium slag in secondary aluminium recovery industry, by adding lime, binder and metallic aluminium.

Discover all products >
GKR Metal

Automotive and Spare Parts

Automotive manufacturers use aluminium to reduce vehicle weight, and die casting is a common way to make cast aluminium parts. GKR Metal is a secondary aluminium producer in Kapaklı, Tekirdağ. We supply automotive aluminium alloy ingots to die casting producers in the automotive and spare parts sector. Every ingot is cast from recycled aluminium, such as scrap auto parts, beverage cans and construction scrap.

Aluminium alloy ingots for automotive die casting

Our Aluminium Alloy Ingots are produced in 4-7 kg pieces. They are made for die casting producers in the automotive and household appliance industries, to the standard and analysis values the customer asks for. The range covers EN AB 43000 to 47100 grades:

Each grade has its own PDF document on the product page, so your purchasing and quality teams can review it before ordering.

Production and quality control

Our plant has 19,800 m² of closed area within 40,000 m² in total, and the plant's monthly production capacity is 2,000 tons. Besides standard melting, refining and casting, we apply flux feeding and degassing to the molten aluminium.

We make all our products to customer specifications. Samples are taken at every stage of production and analysed in our Spectromaxx spectrometer, which is calibrated and verified with i-call routinely. Alloy ingots are also examined under Nikon optical microscopes to measure the porosity ratio and the distribution of primary silicon, primary aluminium and eutectic Al-Si phases. More detail is on our technologies page.

Our certificates include ISO 9001:2015 (quality management), ISO 14001 (environmental management), ISO 45001 (occupational health and safety) and ISO 10002 (customer complaints handling).

Recycling and sustainability

Aluminium can be recycled again and again, and recycling it needs less energy than making primary aluminium. At GKR Metal that cycle is our business: scrap aluminium is melted and cast into ingots, which die casters turn back into products such as auto parts.

We hold a Zero Waste Certificate and an environmental permission and licence. We also had our corporate carbon footprint for January to December 2023 calculated with ClimatePartner. See the whole story on Discover recycling.

Why aluminium for automotive parts

The right grade depends on the part and the casting process. Our experts will guide you to the right solution for your needs.

Looking for a secondary aluminium supplier for automotive or spare parts castings? Contact us with your grade, quantity and specification.

Other sectors

ClimatePartner Corporate Carbon Footprint report, January–December 2023