Zero waste certificate

LME Market Data

Alum
3330.00 $
A.Alloy
2990.00 $
Copper
13373.00 $

Metal Bulletin

Weekly
2620 € / Ton

The recipe for an unstoppable recycling base.

GKR Metal is Turkey’s one of the leading secondary Aluminium manufacturer. Our plant which is located in Tekirdağ (in the European side of Turkey) has 19.800 m² closed and 40.000 m² total area.

Read more >

Products

  • Aluminium Alloy Ingots

    Aluminium ingots are produced between 4-7 kg and shipped up to 1 ton bundle for the Turkey’s largest companies that are producing die casting products for international automotive and household appliance companies.

  • Aluminium T-Ingots

    T-ingots are produced between 300-1000 kg our customers that are producing billets, sheets, coils and bars for mainly construction, food and beverage can companies.

  • Deoxidants

    Deoxidants are produced with aluminium rates of 94% - 97%. They can be produced as half ball (between 150-300 grams) or as ingot (between 4-7 kg). Our customers who are operating in Iron/Steel industry are using this product to reduce the amount of dissolved oxygen and other impurities.

  • Briquetted Flux

    Synthetic slag maker is a commercial, eco-friendly product, obtained from recovering the salt inside the aluminium slag in secondary aluminium recovery industry, by adding lime, binder and metallic aluminium.

Discover all products >
GKR Metal

Aluminium is a major material in modern construction, from window and door systems to facades and roofing. Before it becomes a profile or a sheet, it starts as a large ingot. GKR Metal, a secondary aluminium producer in Kapaklı, Tekirdağ, produces aluminium T-ingots for construction supply chains, cast from recycled aluminium for companies that make billets, sheets, coils and bars.

T-ingots for billet, sheet and coil producers

Our Aluminium T-Ingots are produced between 300 and 1000 kg. We make T-ingots, T-bars and sows in the 3xxx, 5xxx, 6xxx, 7xxx and 8xxx series. Our customers use them to produce billets, sheets, coils and bars for companies working mainly in construction, and in food and beverage cans.

Billets are commonly extruded into profiles, while sheets and coils are rolled products. Both start from a casting, so composition matters, and we make all our productions according to customer specifications. The product page lists the Aluminium T-Ingot / T-Bar / SOW with its PDF document.

Production and quality control

The plant covers 19,800 m² under roof within a 40,000 m² site, and the plant's monthly production capacity is 2,000 tons. Our machine park includes a tilting rotary furnace, reverberatory smelting furnaces, holding furnaces and conveyor lines for ingots.

Each incoming raw material delivery gets a lot number, and a 400 kg sample of every lot is melted in the crucible furnace. Free iron percentage, yield and spectral analysis are recorded under the lot number. During production we take samples at each stage and analyse them in a Spectromaxx spectrometer, and we use a flux feeder, a vacuum density test device and degassing to supply products of high purity and low gas density. See the technologies page for details.

Our certificates include ISO 9001:2015, ISO 10002, ISO 14001 and ISO 45001, plus an environmental permission and licence and a scrap import permit certificate.

Recycling and sustainability

Construction is one of the places where aluminium scrap comes from, and one of the places it returns to. We melt scrap aluminium, including construction scrap, auto parts and beverage cans, and cast it into ingots for new products. We hold a Zero Waste Certificate.

We had our corporate carbon footprint for January to December 2023 calculated with ClimatePartner. Follow the full cycle on Discover recycling.

Why aluminium works in construction

Planning a supply of T-ingots or need a particular series? Contact us with your series, weight and annual volume.

Other sectors

ClimatePartner Corporate Carbon Footprint report, January–December 2023